How to Replace a Saab 9-3 Key
The Saab 9-3 is a great car that is full of driver appeal. It is a powerful engine with good visibility. It also has a high safety rating.
However, it is crucial to ensure that you have at least two keys working for your vehicle. It is costly to replace a key in the event that you lose it.
How to Replace the Ignition Key on the Saab 9-3
If your car key won't start in the ignition it is time to replace it. This guide will show you how to replace the ignition key on the Saab 9-3. You'll need to replace the key, get another reprogrammable device, and then purchase a new casing for your key-fob.
Unlike older models, most modern Saab cars have a transponder on the key-fob rather than a physical key that can be used to unlock and start the car. The rechargeable batteries contained in the key-fob will eventually become worn out and can't hold any charge. This is especially the case if you use the same key on the same lock.
A professional locksmith can replace the battery quite easily. saab key fob programming can also do it yourself if have the appropriate tools and a bit of patience. The first step is to take the key-fob apart. Insert an open-ended head into the slot that is in the middle of your case. You will need to work slowly, as the plastic is thin and easily damaged.
After the case has been opened, you can create the new key by combining lower portion of the old key along with transponder and banana. This will ensure that the new key is linked to the CIM correctly, which could make all the difference when replacing the original key for your Saab 9-3.
How to Replace the Ignition Key in a Saab 900
If you don't have two keys, you'll have to remove the steering wheel and dashboard in order to access the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, it is possible to remove the dashboard and trim pieces around the steering wheel. Once the dash has been removed, insert an opening with a screwdriver behind the ignition switch.
The ignition barrel has an ignition lock that can prevent the vehicle from starting if key isn't inside it. If the ignition switch on your 900 isn't working properly, check the key to determine if it's in the lock or in the barrel of the ignition. You should also rotate your keys and keep them clean to avoid breaking.
Saab cars differ from other cars due to the fact that they do not have traditional metal keys. Instead, the car detects electrical signals that come from the key fob via the use of a special microchip.
If you lose only one working key fob, the dealer will charge you the most expensive dollar to replace your computer module (known as the CIM). We can reprogram the EEPROM of your computer to make it accept new keys without having to replace it. You will save over 50% on the dealer's cost! This is the SAAB Key PROGRAM. Find out more about it here!
How to Replace the Ignition Key on a Saab 9-5
The metal component of classic Saab keys is simple to copy and doesn't represent a significant risk to theft of vehicles. The electronic component of the key-fob has an embedded chip that can identify the car when the key is inserted into the ignition switch.
Saab's anti-theft system has relied on this technology for over 10 years. It's not as good as a physical lock on the door, but it does make the act of stealing your car harder. Every Saab owner must keep an extra Saab key in their vehicle.
Most new Saabs come with two keys at the factory, however you can add more at a dealer through a special handheld computer known as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is the NG 9-3 models, with more modern, more advanced features that require keys-fobs.
The dealer will replace the CIM or TWICE module in these cars if keys are lost. They'll cost you top dollar for doing it. However, we can reprogram your EEPROM in your existing computer and set it up to accept new keys, and not replace the expensive modules.
How to replace the ignition Key on an XC90 Saab
If your SAAB 9-3 key fob begins having trouble turning the lock barrel it could be time to replace it. It's rather simple and doesn't need you to visit an agent. Instead you can complete the process yourself at home using a few simple tools.
The first step is to prepare the new key. Before you begin, ensure that the anti-theft system has been disabled by placing blocks on the rear wheels and activating the handbrake. Place the key in the ignition, and then turn it to the "on" position. This will activate the accessories, but not start the engine. Repeat this process five times, and then leave the key in the on position.
You'll need to purchase an additional case for your key fob. They can be found at any auto parts store, and they're typically quite affordable. You can purchase them without electronics based on the model.
To open up the case, place a flathead screwdriver in the slot located in the middle and gently work it. After you have split the case, you will have access to all of the internal electronics. To get rid of the electronics, use a small flathead screwdriver, and try to pry them out with a gentle force.